54
55
operation
Before First use
The appliance has the drip tray, water tank and storage tray in place when you unpack it
from the box. The drip tray is located in the base of the machine towards the front. The water
tank is located in the back of the machine. The charcoal water filter is located inside the wa-
ter tank. It needs to be removed before washing the water tank. The storage tray is located
at the base of the machine behind the drip tray. The drip tray, water tank and storage tray
slide in and out for easy access. The bean hopper is located on top of the drip tray when
the machine is first unpacked. Ensure you have removed all parts and accessories before
discarding the packaging. Remove the water tank and wash in warm, soapy water using a
non-abrasive washing liquid. Rinse and dry thoroughly.
Wipe the outer housing, bean hopper and drip tray with a soft damp cloth and dry thorough-
ly. Do not immerse the outer housing, power cord or power plug in water or any other liquid.
note:
Do not clean any of the parts or accessories in the dishwasher.
assembling Your »Design espresso Machine advanced
pro g«
1.
Insert the storage tray into the base of the machine and slide towards
the back wall. The storage tray conveniently stores all the cleaning ac-
cessories and filters so they are not misplaced.
2.
Insert the ›Empty Me!‹ indicator into the drip tray and place the Cof-
fee Grinds Separator on top. Then place grill on top. Slide the drip tray
into position in the base of the machine in front of the storage tray.
3.
Before installing the charcoal water filter, remove it from the plastic
bag, and soak in a cup of water for 5 minutes. Rinse the filter under
cold running water for 5 seconds. Wash the stainless steel mesh in the
plastic filter holder with water and assemble. Set the date dial to 2
months ahead. Insert the assembled filter holder into the empty water
tank and push to lock into place.
note:
Please refer to ›Care and Cleaning‹ on, ›Installing the Filter in
the Water Tank‹
4.
Insert the Hopper into position and turn the hopper dial clockwise
90° to lock.
note:
Refer to ›Care and Cleaning‹ instructions to properly maintain
your burr grinder.
note:
Before each use it is recommended to complete a water flushing
operation, without ground espresso in the portafilter, to ensure that the
machine has been preheated.
using your »Design espresso Machine advanced pro g«
Dual Wall Filters for Beginners
Eliminates the guesswork for fast and easy to make espresso. The appliance is supplied with
two Dual Wall
Filters - 1 x single shot and 1 x double shot. These filters are designed to
intentionally slow the water flow rate during brewing, resulting in an espresso that has been
extracted at the correct pressure, leading to a rich, golden crema. These filters are suited to
both pre-ground vacuum packed espresso as well as beans ground fresh in the integrated
grinder.
