44
45
attention:
Never use abrasive cleaners, any chemicals, disinfectants, cleaning
pads or any sharp utensils (i.e. metal scouring pads) for cleaning.
• Clean the outer housing of the jug with a warm damp cloth or sponge and dry with
a soft towel. Do not let any liquid run into the housing of the jug.
important:
ensure to clean all residues from the bottom of the jug to avoid scorch
of ingredients.
• Always rinse the jug with clear cold water before frothing.
• To clean stubborn residues fill some dishwasher detergent into the jug and add a
little bit of hot water. Soak the residues for approximately 15 minutes before emptying
the jug. thoroughly rinse the jug with cold clear water afterwards.
• To clean all residues of the detergent assemble the appliance, fill the jug to the max
level indicator for frothing milk (120 ml) with clear cold water and turn the appliance
on. Pour out the water. the appliance is ready for use.
• Occasionally, it is recommended to operate the appliance with a small amount of
nonsudsing detergent. Fill jug to the max level indicator for milk froth with warm soapy
water and turn the appliance on. Rinse thoroughly with cold clear water afterwards.
• Care should be taken when cleaning smaller parts, such as the attachments, to
avoid accidentally dropping in the garbage disposal or discarding in the trash.
• Prior to use and between consecutive cycles, the appliance should be rinsed with
cold water to insure proper operation.
warning :
to reduce the risk of fire or electrical shock, do not remove the bottom
cover from the power base or disassemble the containers heating unit. Repair should
be done by authorised service personnel only.
storage
warning:
Young children must be supervised that they do not play with the appli-
ance or any part of it. the frothing discs could be swallowed by young children, thus
causing risk of suffocation. Jug, lid and measuring cup get very hot during operation.
always unplug the appliance when it is not in use. Let the appliance cool down,
before cleaning or storing the appliance. always clean the appliance and all its parts
before storing to avoid accumulation of dried-on food (see: ›care and cleaning‹).
ensure to store the appliance where it is clean, dry and safe from frost, direct sunlight
and inadmissible strain (mechanical or electric shock, heat, moisture) and where it is
out of reach of young children. Place the appliance on a clean and stable surface,
where it cannot fall. Do not place any hard or heavy objects on the appliance or
any part of it.
always handle the power cord with care. Power cords may never be knotted, twi-
sted, pulled, strained, or squeezed.
Do not use any parts or accessories of the appliance for any other purpose than
operating the appliance. it is good advice to store the parts and accessories of the
appliance with the appliance.
1. ensure that the appliance is switched off (indicator is illuminated continuously or
dark) and unplug the appliance. Let the appliance cool down, than clean the
appliance and its parts before storage (see: ›care and cleaning‹).
2. Loosely wrap the power cord around the cord wrap in the bottom of the power
base.
3. Place the jug on the power base.
4. insert the frothing disc into the jug.
5. Place the lid on the jug and insert the measuring cup in the lid.
caution:
Do not hold the appliance by the jug, power cord or lid for moving the
appliance. to move the appliance, always hold the power base at both sides near
the bottom to avoid damage.
6. grasp the power base with both hands at its sides, and place it on a suitable
surface, where it cannot fall, and is out of reach of young children.