38
39
• During operation and shortly thereafter: Only touch the jug or lid at the designated
handles. Do not hold your hands or face over the appliance. Steam could escape
from under the lid. additionally, condensate could accumulate under the lid and
measuring cup and drip, when opening the lid. Do not remove the lid or jug, while
the appliance is working (indicator is blinking), to avoid overflow and overheating.
add further ingredients via the opening in the lid, where the measuring cup is placed.
always switch off (press StaRt/StOP button once) the appliance or wait until it stops
working automatically (acoustic signal sounds twice, indicator is illuminated continuo-
usly or goes out), before removing the jug. Place the jug on a stable, level, moisture-
resistant, and heat-resistant surface, before removing the lid. Keep the hot jug away
from heat-sensitive objects.
• Only use the appliance for food. Do not process thick mixtures, solid, or high-proof
alcoholic foodstuffs. the appliance is not suited for melting, mixing or chopping solid
ingredients.
attention:
all parts (base, jug, lid with seal, floating milk frothing disc) are not
dishwasher safe.
Note: During the first use the appliance may develop a slight odor when turning on
the engine. this is normal and completely harmless. the smell will vanish after a cou-
ple of applications.
preparing the appliance
warning:
Only place the appliance on a stable, dry, level, and clean surface.
Do not place the appliance on inclined surfaces. Do not place any clothes or tissue
or other foreign objects on or under the appliance during operation, to avoid risk
of fire or electric shock. Do not block the ventilation slots at the bottom and rear of
the power base. During operation, the operating elements (see: ›Knowing Your Latte
Magic‹) must be accessible any time.
Before assembling the appliance, always ensure that all parts and accessories you
wish to use are in proper working order (e.g. not cracked, chapped, broken or dis-
torted). Do not use any damaged or unsuitable parts to avoid risk of injuries and
damage.
Do not operate the appliance with the filling level below the MiN filling mark or
exceeding the MAX filling mark. ensure not to spill any liquids on the power base.
the jug must always be clean and dry, when placed on the power base to avoid
risk of electric shock or damage.
B
C
A
D
100 ml
150 ml
250 ml
1. Place the power base on a flat, stable, moisture-resistant
and heat-resistant surface near a suitable wall power outlet
(see: ›important Safeguards‹) with the StaRt/StOP button
facing to you. Leave at least 10 cm of free space to walls,
curtains, boards and other objects on each side of the
appliance. Leave at least 50 cm of free space above the
appliance to get unhindered access. ensure that the appli-
ance is unplugged.
Note: clean the jug with cold water before frothing milk.
2. take the milk frothing disc and place it with the bulge poin-
ting upwards between the three pins on the frothig disc
mount - the spiral is brought by a magnet to the correct
position. (pic. a and B).
3. grab the dic mount with the inserted frothing disc and
place it upright, the long pin facing up (see pic c) at the
bottom of the foam jug.
4. Pour the desired amount of chilled milk into the jug. You
can use skim milk or whole milk. Pay attention to the MAX
mark the inside of the jug when pouring the milk. the
MAX mark for heating milk is 250 ml and the MAX mark
for frothing milk in 150 ml. the MiN mark is 100 ml. For
frothing milk you need less milk because the finished foam
has a larger volume than heated milk and would otherwise
overflow. Keep the container it as upright as possible. (see
pic D).
note:
take the jug of the power base before filling.
important:
there are two max level indicators inside the jug. the lower level
max level indicator is for frothing milk and the upper max level indicator for heating
milk (picture c). You need less milk for frothing because the volume of milk froth is
bigger then the volume of heated milk. Using too much milk when frothing would
cause overrunning.
important:
Never overfill the jug. Spilling liquids can cause damage to the elec-
tronic components.