3
© 2023, JUN-AIR
We reserve the right to make any alterations which may be due to any technical improvements
Printed in the USA
106R Basic Systems User Guide
6190770 (Rev B)
SAFETY
Important - read this first!
Please read the following information and operating instructions
included with this product before use . This information is for your
safety and it is important that you follow these instructions . It will
also help prevent damage to the product . Failure to operate the unit
in accordance with the instructions or using JUN-AIR unauthorized
spare parts can cause damage to the unit and could cause serious
injury .
CAUTION: To reduce risk of electric shock
• Only authorized service agents should carry out service .
Removing parts or attempting repairs can create an electric
shock . Refer all servicing to qualified service agents .
• If this unit is supplied with a three-pin plug, connect with a
properly grounded outlet only .
WARNING: To reduce risk of electrocution
•
Do not use this unit with electrical voltages other than stated
on the rating plate .
•
Always unplug this unit immediately after use and store in a dry
place .
•
Do not use this product in or near liquid or where it can fall or
be pulled into water or other liquids .
•
Do not reach for this product if it has fallen into liquid . Unplug
immediately .
•
This unit is not weatherproof . Never operate outdoors in the
rain or in a wet area .
DANGER: To reduce risk of explosion or fire
•
During spraying with combustible liquids, risk of explosion may
arise, particularly in closed rooms .
•
Do not use this product in or near explosive atmospheres or
where aerosol products are being used .
•
Do not pump any other gases other than atmospheric air .
•
Do not pump combustible liquids or vapors with this product;
do not use it in or near areas with combustible or explosive
liquids or vapors .
•
Do not use this unit near open flames .
CAUTION: To prevent injury
•
Compressed air can be dangerous; do not direct airflow at
a person’s head or body .
•
Always keep the system out of reach of children .
•
Never operate this product if it has a damaged power lead or
plug, if it has been dropped or damaged, or if it has fallen into
water . Return the product to a service center for examination
and repair .
•
Keep the electrical cable away from hot surfaces .
•
Ensure all openings are kept free of restriction and never
restart when the unit cools and the overload resets .
Never place the system on a soft surface where
the openings may be blocked . Keep all openings free from
dust, dirt and other particles .
•
Never leave this product unattended when plugged in .
•
Never insert fingers or any other objects into fans .
•
This unit is thermally protected and can automatically restart
when the overload resets .
•
Wear safety glasses, when servicing this product .
•
Use only in well ventilated areas .
•
This product may only be connected to units or tools with a
max . pressure rating higher or equal to that of the compressor .
•
The surface of the compressor can get hot . Do not touch
compressor motor during operation .
Failure to observe the safety precautions could result in severe
bodily injury, including death in extreme cases.
IMPORTANT: General directions for use
•
Protect compressor against rain, moisture, frost and dust .
•
The compressor is constructed and approved for a max .
pressure as stated under Technical Specifications .
•
Do not operate the compressor at ambient temperatures
exceeding 40°C/104°F or falling below 0°C/32°F .
•
If the supply power lead on the compressor is defective, an
authorized
Jun-Air
distributor or other qualified personnel
must carry out the repair .
