FROST PROTECTION :
It will be activated when the temperature of the water in the
boiler falls below 4°C and activates the primary circulation
pump. In order for the frost protection mode to be active,
boiler's electrical switch must be switched on and the system
water must be full.
6.4
PROGRAMMING
If there is no other control panel (cascade control unit, etc.) in
the system, all personalized settings, parameters, fault resets
will be made via the control panel.
E.g. ;
Date and time adjustment:
Push OK button. Select «
Time of day and date
» then push
OK
button again.
Push
OK
button for adjusment. Push
OK
button to adjust hour
and minute settings.
Turn the adjusment knob one click and set mounth and day
with pushing
OK
button.
Push
OK
button to adjust the year as a final step. Push ESC
button to return the home secreen.
Frost Protection function is valid only for boiler, can
not protect the installation.
34
Summary of Contents for ALUBOX X-treme 350
