Gasmate Ignite BQIG10, Manual, Page: 8 / 16

8 9
STEP 2
Once the wall bracket is secured;
remove the BBQ hotplate from
the BBQ, to reduce the weight for
handling during assembling. To
remove the hotplate firstly open
the hood and fold down the tray
shelf. Push the hotplate towards
the back of the BBQ; then lift the
front of the Hotplate clear of the
front Hotplate locking tabs, and
then lift the Hotplate out towards
the front of the BBQ.
STEP 3
Ask an assistant to hold the BBQ in
position and align holes in BBQ side
panel with the wall bracket slots. Insert
the shoulder screw (Item 5) through the
crescent slot in the wall bracket; through
the Large washer (Item 27.) then into the
lowest hole in the BBQ side panel. Repeat
on the opposite side, ensuring to catch the
large washer between the BBQ and the
wall bracket.
Once there is a screw inserted in each
side, the BBQ can swivel on these first 2
screws; and it will be easier to get the last
2 screws in. Have your assistant Lift the
front of the BBQ upward, rotating the BBQ
until the rear hole aligns with the short slot
in the wall bracket. Slip the small washer
(Item 8) between the BBQ body and the
wall bracket and insert the Shoulder screw
though the short slot and also through the
washer (you may need to rotate the BBQ
to do this). Repeat on the opposite side.
Tighten all screws with the Hex Wrench
provided.