Gasmate Ignite BQIG10, Manual, Page: 7 / 16

6 7
ASSEMBLY INSTRUCTIONS
Tools Needed for Product Assembly
• Hex Wrench (Allen Key) is included
• Adjustable wrench
Tools/Hardware needed for Mounting BBQ
• Adjustable wrench or slotted recess or Phillips Head screw driver to match the hard ware being used to
mount to wall.
• Studded walls will require a Stud finder.
• Drill to make hole in wall. For brick or plaster walls a masonry bit will be required.
• The bolts being used to mount the BBQ should be at least M6 metric bolts or masonry wall mounting bolts.
Check with your local hardware supplier for professional advice on gauges of hardware to use.
• An assistant to position the BBQ whilst you fix it to the wall bracket.
880mm
STEP 1
Unpack the BBQ and remove all
packaging material.
For wall mounting, use the bracket
as a template to mark where holes
will be made on the wall. The top
of the bracket must be 880mm from
the floor (see pic). When the BBQ is
folded this will allow for the clearance
of a 9kg gas bottle; and give a
cooking surface height of 900mm.
For a studded wall the holes must
be aligned with the wall framework
where possible. Use a stud finder to
make sure the holes will be aligned
with the wall frames/studs.
For Concrete or brickwork use a
masonry drill bit to drill the holes
as required, and include suitable
mounting hardware. The hardware
fittings used must take the weight of
the BBQ and the weight of the food
that may be cooked on the BBQ.