background image

16

17

•  Check for damaged parts before operating this 

rotisserie.

•  DO NOT touch any hot components.
•  Ensure work area is clear of clutter and possible trip 

dangers.

•  Never wear loose clothing which could get caught in 

moving parts.

•  Never yank or pull the power cord to disconnect it from 

the mains supply socket-outlet.

•  Never carry the rotisserie by its power cord.
•  Keep power cord away from heat, oil, solvents and sharp 

edges.

•  Check power cord for signs of damage before each use. 

If damaged do not use.

•  Power cord must only be replaced by an authorised 

service facility.

•  To clean rotisserie only use a damp soft cloth, never use 

liquid or solvents of any type. 

•  Ensure rotisserie is disconnected when not in use and 

before servicing, making adjustments or when changing 

any accessories.

•  Ensure rotisserie is turned off before connecting to 

mains power supply.

•  Only use an extension cord intended and marked 

“outdoor” use.

•  Only us a ‘3’ core (earth pin) extension cord with this 

rotisserie.

•  DO NOT clean the spit motor while it is on or plugged 

into the mains power supply.

•  Always switch ‘OFF’ and unplug before cleaning.
•  DO NOT spray water or any liquid into the spit motor.
•  Repairs should only be carried out by qualified persons 

using original spare parts. Failure to do so may result in 

considerable danger to the operator. 

•  Ensure the ‘outdoor’ extension cord is not placed across 

walkways so that it is not a trip hazard.

•  DO NOT use in damp or wet conditions.
•  Always ensure that the power cord is fully extended and 

NOT in contact with any part of the spit roaster.

•  Never use the motor if any part of it is damaged.
•  DO NOT attempt to modify the motor, power cord or 

power plug in any way.

•  This product is fitted with a sealed electrical connection 

plug that is compatible to the mains supply for New 

Zealand and meets the requirements of international 

standards. It must be connected to a supply voltage 

that is equal to that stated on the rating label. If the 

mains connection plug or power cord becomes damaged 

it must be replaced with a complete assembly that is 

identical to the original, and this must be replaced by 

an authorised service centre. Always follow the New 

Zealand requirements for connection to the mains 

supply. If in doubt always consult a qualified electrician.

IMPORTANT SAFEGUARDS

•  The power supply must be supplied through a 

residual current device (RCD) having a tripping 

current not exceeding 30mA.

•  Only connect this rotisserie to a socket-outlet 

having an earth contact.

•  DO NOT use the rotisserie during inclement 

weather, rain or damp conditions.

•  Unplug and remove rotisserie when not in use.
•  Never store rotisserie on spit roaster, always 

remove.

•  DO NOT operate the rotisserie with a damaged 

cord or plug, or if rotisserie malfunctions, or has 

been damaged in any manner.

•  To protect against electric shock, DO NOT 

immerse cord, plug or motor in water or expose 

to rain.

•  Avoid contact of the electrical cord with hot spit 

roaster surfaces and grease.

•  Never operate this rotisserie when you are 

tired, drinking alcohol, taking drugs or if taking 

medication that causes drowsiness.

•  This rotisserie is not intended for use by persons 

(including children) with reduced physical, 

sensory or mental capabilities, or lack of 

experience and knowledge, unless they have 

been given supervision or instruction concerning 

use of the rotisserie by a person responsible for 

their safety.

•  Children must be supervised to ensure that they 

do not play with the rotisserie.

•  Pets and animals must be kept away from the 

work area so as to avoid tripping dangers.

Deluxe Spit Roaster

GM160-016

Voltage

240V AC~50 Hz

Input Wattage

15W

Maximum Load

30kg

When using electrical appliances, basic safety 

precautions should always be followed, including the 

following:
•  Never modify this rotisserie as damage and injury may 

occur, and this will void your warranty.

•  Read and understand all instructions.
•  DO NOT touch hot surfaces. Use handles or knobs.
•  The use of accessory attachments not recommended by 

the appliance manufacturer may cause injuries.

•  Extreme caution must be used when moving an 

appliance containing hot oil or other hot liquids.

•  DO NOT use this appliance for anything other than 

intended use.

•  Only connect this rotisserie to 240V AC power.
•  DO NOT place on or near a hot gas or electric burner, or 

in a heated spit roaster.

ELECTRIC MOTOR AND SUPPLY CORD

Summary of Contents for GM160-016





















Reviews: