Gasmate GM160-016, Manual

Page: 6 / 20

6 7
PARTS LIST
ASSEMBLY INSTRUCTIONS
Before assembling the Spit Roaster, read these Instructions carefully.
Assemble the Spit Roaster on a flat, clean surface.
The Spit Roaster is heavy, we recommend two people assemble it.
NOTE:
• Make sure all the plastic protection
(usually a blue film) is removed
before assembling!
• Before assembly, turn the roaster
over, NOTE: put some soft cushions
or protective mat or similar on the
floor to protect the roaster body
and hood.
Caution: Sheet metal can cause
injury. Wear gloves when assembling
the Spit Roaster.
Step 1
Separate parts ready for assembly.
No. Description Qty
1 Spit rod 1
2 Fork assembly 2
3 U-Shaped fork assembly 2
4 Brace prong lock 2
5 R Clip 4
6 Counterweight shaft 1
7 Counterweight 1
8 Cooking grill 3
9 Spit shaft far end bracket 1
10 Charcoal tray 1
11 Spit shaft motor end bracket 1
No. Description Qty
12 Motor assembly 1
13 Cylinder hook 1
14 Spit rod support tube assembly 2
15 Leg assembly 2
16 Castor-3” without brake 2
17 Castor-3” with brake 2
18 Roaster body assembly 1
19 Drip tray brace-left 1
20 Drip tray 1
21 Drip tray brace-right 1
22 Leg cross brace 2
HARDWARE LIST
A. M4×10 Screw
Qty x 4
B. M6×35 Screw
Qty x 24
C. M6 Nut
Qty x 8
Ref # 6
Ref # 7
M5×8×2 PCS (Remove from motor bracket)
Ref # 12
Ref # 11