
7
NOTE
Never attempt to remove the plastic pins from the metal
tube, as these are the locators for the swivel shelf.
To assemble the stand
1. Place the base of the stand on a flat level surface.
With the slots to the bottom, insert the metal tube
into the hole in the centre of the base and push down
firmly. See figure 1.
3. Place the top shelf onto the metal tube with the
utensil rack facing away from you and align it with
the swivel shelf. See figure 3. Push down firmly in the
centre of the top shelf to secure it.
4. Place the base of the BBQ on the top shelf and fit it
into position. The base is correctly positioned when
it is flush with the top shelf of the stand on all sides.
See figure 4.
2. Place the swivel shelf over the metal tube with the
handle on your left. Slide the shelf down the metal
tube until it rests on the two plastic pins. See figure 2.
Figure 2
Figure 1
Figure 6
Figure 5
Figure 4
Figure 3
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 2
Figure 1
Figure 6
Figure 5
Figure 4
Figure 3
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 2
Figure 1
Figure 6
Figure 5
Figure 4
Figure 3
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 2
Figure 1
Figure 6
Figure 5
Figure 4
Figure 3
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6