GASER V3000-CP, Manual, Page: 17 / 57

-17-
8. MAINTENANCE
1. Periodically check the condition of all moving parts: the mesh belt, traction belts, rollers, gears,
bearings, and bushes.
2. Periodically check the condition of the geared motor.
3. Periodically check the general condition of the belt.
4. If any of the rods on the wire mesh belts break, replace the broken rod with a new one using a
connecting tube. The connecting tube must always be in a position where it does not come into
contact with rollers.
5. Take the cover off the box containing the mechanism and lubricate the gears, drive train, and
bearing housings after every 300 hours of work.
6. Lubricate the blade guides and cylinder rods with food-grade oil after every 100 hours of work.
7. Periodically lubricate the following parts with food-grade oil: the former-interior detector (Pos. 13,
General overview), the mesh conveyor-belt axle bushings, and the central neck of the contact
roller.