GASER V3000-CP, Manual, Page: 15 / 57

-15-
4. Remove the paper or cellophane spools and store them in dry place, ideally somewhere airtight.
5. Remove the cover (Pos. 2, Former overview) and the former (Pos. 4, Former overview).
Image 11. Loosening nuts.
Image 12, Removing cover Image 13, Removing shaper
6. Removing the ejector (Pos. 23 General overview). To do this, first disconnect the blower tube. Next,
loosen the two nuts using the two non-adjustable spanners. Finally, loosen the cylinder shaft from
the ejector using a spanner.
Image 14, Disconnecting blower tube Image 15, Loosening nuts.