GASER V3000-CP, Manual, Page: 11 / 57

-11-
14. The interior mesh belt (Pos. 15, Interior belt overview) must be kept in tension. If not, it could
break. It is tensioned using the roller (Pos. 8, Interior belt overview) closest to the blade.
6.3 Operation
The machine has two control panels: a front one and a rear one. They both have different functions.
6.3.1 Front control panel
The front control panel comprises the emergency stop button (Pos. 15, Electrical installation
overview), the green button (Pos. 17, Electrical installation overview), the green and red lights (Pos. 13
and 14, Electrical installation overview), the pressure controllers (Pos. 11 and 12, Pneumatic
installation overview) and the pressure gauges (Pos. 86 and 87, General overview).
Image 3, Front control panel
The emergency stop button, as its name suggests, should be used as an emergency stop. The red
light indicates that the machine IS NOT ready to be used. This might be because: one of the paper
spools has run out, the emergency stop button has been pressed, or one of the guards is not closed.
The green light indicates that the machine has been reset and is ready to be started up. Use the green
push button to start the machine.
WARNING: DO NOT OPEN THE DOOR WHEN THE MACHINE IS RUNNING