background image

Matters need attention

A. Please read this instruction manual before using the detector.

B. The detector must be used in compliance with the designated procedures of our company. C. The warranty period of this transmitter 

is 12months (starts from the date userget the detector). 

Users should comply with the instructionsin the use of this detector. Any damages or malfunctions caused by improperoperation of users are 

not within the scope of warranty.

D. Repairand replacement of any parts must be operated by trained staff under authorization of our company, using original spare part. 

The operatoris responsible for the liability if users operate the repair of replacement by themselves.

E. There is acid solution inside the transmitter, please do not disassembleit. And pay attention not to damage the frontal membrane of 

the transmitter. If the skin is stained with the acid solution. the right remedy is to flushing the stained skin continuously with clean water for 

1 0minutes.

F. The detector must be calibrated for once each year. The explosion proof sheet parts of the transmitter need to be cleaned 

regularly (blow with low pressure compressedair), otherwise the detection sensitivity will be affected by the dust and impurities clogging 

protection hole.

Notice to Reader

Please read this instruction manual before using the detector

online fixed gas detector 

GD300:XX 

Instruction Manual

www.gasdog.com

[email protected]

+86 773-280-9002

5

Summary of Contents for 41547












Reviews: