GAS GAS SM 700 2023, Owner'S Manual

Page: 111 / 128

TECHNICAL DATA 21
109
Screw, cylinder head M10 Tightening sequence:
Tighten diagonally, beginning with the
rear screw on the timing chain shaft.
1st stage
15 Nm (11.1 lbf ft)
2nd stage
30 Nm (22.1 lbf ft)
3rd stage
45 Nm (33.2 lbf ft)
4th stage
60 Nm (44.3 lbf ft)
Thread greased
Screw, engine sprocket M10 60 Nm (44.3 lbf ft)
Loctite ® 243™
Screw plug, oil channel M10x1 15 Nm (11.1 lbf ft)
Loctite ® 243™
Screw plug, water pump drain hole M10x1 15 Nm (11.1 lbf ft)
Screw, oil line M10x1 10 Nm (7.4 lbf ft)
Screw, unlocking for timing chain ten-
sioner
M10x1 8 Nm (5.9 lbf ft)
Spark plug outside M10x1 11 Nm (8.1 lbf ft)
Spark plug inside M12x1.25 18 Nm (13.3 lbf ft)
Coolant temperature sensor on the
cylinder head
M12x1.5 12 Nm (8.9 lbf ft)
Oil drain plug with magnet M12x1.5 20 Nm (14.8 lbf ft)
Screw plug, oil pressure control valve M12x1.5 20 Nm (14.8 lbf ft)
Screw plug, oil channel M14x1.5 15 Nm (11.1 lbf ft)
Loctite ® 243™
Engine case stud M16x1.5 25 Nm (18.4 lbf ft)
Loctite ® 243™
Nut, rotor M18x1.5 100 Nm (73.8 lbf ft)
Loctite ® 243™
Nut, inner clutch hub M20x1.5 120 Nm (88.5 lbf ft)
Loctite ® 243™
Nut, primary gear wheel M20LHx1.5 90 Nm (66.4 lbf ft)
Loctite ® 243™
Plug, oil screen M20x1.5 15 Nm (11.1 lbf ft)
Plug, oil thermostat M24x1.5 15 Nm (11.1 lbf ft)
Plug, timing chain tensioner M24x1.5 25 Nm (18.4 lbf ft)
Screw plug, alternator cover M24x1.5 8 Nm (5.9 lbf ft)
21.3 Capacities
21.3.1 Engine oil
Engine oil 1.70 l (1.8 qt.) Engine oil (SAE 10W/50) ( p. 116)
21.3.2 Coolant
Coolant 1.20 l (1.27 qt.) Coolant ( p. 116)