SERVICE WORK ON THE CHASSIS 11
59
S02195-01
–
Check the chain sliding piece for wear.
» If the lower edge of the chain pins is in line with or below the
chain sliding piece:
–
Change the chain sliding piece.
–
Check that the chain sliding piece is firmly seated.
» If the chain sliding piece is loose:
–
Tighten screw on the chain sliding piece.
Guideline
Screw, chain
sliding piece
M8
15 Nm (11.1 lbf ft)
Loctite
®
243™
400985-01
–
Check the chain guide for wear.
Info
Wear can be seen on the front of the chain guide.
» If the light part of the chain guide is worn:
–
Change the chain guide.
V02763-10
–
Check that the chain guide is firmly seated.
» If the chain guide is loose:
–
Tighten the screws on the chain guide.
Guideline
Remaining screws,
chassis
M6
10 Nm (7.4 lbf ft)
Finishing work
–
Remove the rear of the motorcycle from the wheel stand. (
Summary of Contents for SM 700 2023
Page 1: ...OWNER S MANUAL 2023 SM 700 Art no 3215134en...
Page 2: ......
