17 SERVICE WORK ON THE ENGINE
96
17.1
Checking the engine oil level
Info
The engine oil level must be checked when the engine is warm.
Condition
The engine is at operating temperature.
Preparatory work
–
Stand the motorcycle upright on a horizontal surface.
V02699-10
Main work
–
Check the engine oil level.
Info
After switching off the engine, wait one minute before
checking the level.
The engine oil must be between the lower and upper edge of the
oil level viewer.
» If the engine oil level is not at the specified level:
–
Add engine oil. (
17.2
Changing the engine oil and oil filter, cleaning the oil screens
Warning
Danger of scalding
Engine and gear oil get very hot when the motorcycle is ridden.
–
Wear suitable protective clothing and safety gloves.
–
In the event of scalding, rinse the area affected immediately with lukewarm water.
Note
Environmental hazard
Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with the appli-
cable regulations.
Info
Drain the engine oil while the engine is at operating temperature.
S02210-10
–
Position an appropriate container under the engine.
–
Remove oil drain plug
1
with the magnet and seal ring.
–
Allow the engine oil to drain completely.
Summary of Contents for SM 700 2023
Page 1: ...OWNER S MANUAL 2023 SM 700 Art no 3215134en...
Page 2: ......