GAS GAS SM 700 2023, Owner'S Manual

Page: 83 / 128

ELECTRICAL SYSTEM 14
81
Preparatory work
–
Open the fuel tank filler cap. ( p. 19)
–
Remove the seat. ( p. 49)
V02739-10
Main work
–
Pull off engine control unit
1
from the holder and hang to the
side.
–
Take off protection caps
2
.
S04580-10
–
Remove a defective main fuse
3
with needle nose pliers.
Info
A faulty fuse has a burned-out fuse wire
A
.
A spare fuse
4
is located in the starter relay.
–
Insert a new main fuse.
Fuse (58011109130) ( p. 111)
Info
Insert a new spare fuse into the starter relay to have it avail-
able when needed.
–
Check that the electrical system is functioning properly.
–
Mount the protection caps.
–
Position the engine control unit.
Finishing work
–
Mount the seat. ( p. 50)
–
Set the clock. ( p. 22)
14.5 Changing the ABS fuses
Warning
Fire hazard Incorrect fuses overload the electrical system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
Info
Two fuses for the ABS are located under the seat. These fuses protect the return pump and the hydraulic unit of the
ABS. The third fuse, which protects the ABS control unit, is located in the fuse box.
Preparatory work
–
Open the fuel tank filler cap. ( p. 19)
–
Remove the seat. ( p. 49)
–
Pull off the engine control unit from the holder and hang to the side.