GAS GAS MC 85 2023, Owner'S Manual

Page: 93 / 176

COOLING SYSTEM 14
91
S04351-11
Main work
–
Position the motorcycle upright.
–
Place an appropriate container under the water pump cover.
–
Remove screw
1
. Take off radiator cap
2
.
–
Completely drain the coolant.
–
Mount and tighten screw
1
with a new seal ring.
Guideline
Coolant drain plug M6 8 Nm (5.9 lbf ft)
–
Completely fill the radiator with coolant.
Coolant ( p. 117)
V00870-10
–
Loosen screw
3
until coolant escapes without bubbles.
–
Mount and tighten screw
3
.
Guideline
Screw, radiator bleed-
ing
M6 8 Nm (5.9 lbf ft)
–
Mount radiator cap
2
.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling
them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation when
running the engine.
–
Use effective exhaust extraction when starting or run-
ning the engine in an enclosed space.
–
Allow the engine to warm up and cool down again.
–
Check the coolant level. ( p. 88)
Finishing work
–
Check the cooling system for leaks.