GAS GAS MC 85 2023 Owner'S Manual Download Page 16

Page: 16 / 176

6 CONTROLS

6.1

Clutch lever

S04274-10

Clutch lever

is fitted on the left side of the handlebar.

The clutch is hydraulically operated and self-adjusting.

6.2

Hand brake lever

S04275-10

The hand brake lever

is fitted on the right side of the handlebar.

The front brake is engaged using the hand brake lever.

6.3

Throttle grip

S04275-11

Throttle grip

is fitted on the right side of the handlebar.

6.4

Stop button

S04274-11

The stop button

is fitted on the left side of the handlebar.

Possible states

• The stop button

is in the basic position

–

In this position, the

ignition circuit is closed and the engine can be started.

• Stop button

pressed

–

In this position, the ignition circuit is inter-

rupted, a running engine stops, and a non-running engine will not

start.

Summary of Contents for MC 85 2023

















































































































































































Search results

Summary of Contents for MC 85 2023

Reviews:

Related manuals for MC 85 2023

Brands by name

Popular brands

GAS GAS MC 85 2023, Owner'S Manual

Search results

Summary of Contents for MC 85 2023

Reviews:

Related manuals for MC 85 2023

Brands by name

Popular brands