GAS GAS MC 85 2023, Owner'S Manual

Page: 67 / 176

SERVICE WORK ON THE CHASSIS 11
65
11.42 Checking the fluid level of the hydraulic clutch
Info
The fluid level rises with increasing wear of the clutch facing discs.
S04281-10
–
Move the hydraulic clutch fluid reservoir mounted on the handlebar
into a horizontal position.
–
Remove screws
1
.
–
Take off cover
2
with membrane
3
.
–
Check the fluid level.
Guideline
Level
A
(fluid level below
container rim)
4 mm (0.16 in)
» If the fluid has dropped below marking
A
in the level viewer:
–
Correct the fluid level of the hydraulic clutch. ( p. 65)
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Use water to immediately clean up any brake fluid that has
overflowed or spilled.
11.43 Correcting the fluid level of the hydraulic clutch
Warning
Skin irritation Brake fluid causes skin irritation.
–
Keep brake fluid out of the reach of children.
–
Wear suitable protective clothing and safety glasses.
–
Do not allow brake fluid to come into contact with the skin, the eyes or clothing.
–
Consult a doctor immediately if brake fluid has been swallowed.
–
Rinse the affected area with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water immediately and consult a doctor if brake fluid comes into contact with the
eyes.
–
If brake fluid spills on to your clothing, change the clothing.
Info
The fluid level rises with increasing wear of the clutch facing discs.
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and clutch lines are not designed for
DOT 5 brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.