STORAGE 18
105
18.1
Storage
Warning
Danger of poisoning
Fuel is poisonous and a health hazard.
–
Avoid skin, eye and clothing contact with fuel.
–
Immediately consult a doctor if you swallow fuel.
–
Do not inhale fuel vapors.
–
In case of skin contact, rinse the affected area with plenty of water.
–
Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.
–
Change your clothing in case of fuel spills on them.
–
Keep fuels correctly in a suitable canister, and out of the reach of children.
Info
If you plan to garage the motorcycle for a longer period, perform the following steps or have them performed.
Before storing the motorcycle, check all parts for function and wear. If service, repairs, or replacements are neces-
sary, you should do this during the storage period (less workshop overload). In this way, you can avoid long work-
shop waiting times at the start of the new season.
401058-01
–
When refueling for the last time before taking the motorcycle out of
service, add fuel additive.
Fuel additive (
–
Refuel. (
–
Clean the motorcycle. (
–
Change the gear oil.
–
Check the antifreeze and coolant level. (
–
Check tire pressure. (
–
Empty the carburetor float chamber.
–
Store the vehicle in a dry location that is not subject to large fluctua-
tions in temperature.
Info
GASGAS Motorcycles recommends jacking up the motorcy-
cle.
–
Raise the motorcycle with a lift stand. (
–
Cover the motorcycle with a tarp or cover that is permeable to air.
Info
Do not use non-porous materials since they prevent humid-
ity from escaping, thus causing corrosion.
Avoid running the engine for a short time only. Because the
engine will not warm up sufficiently, the water vapor pro-
duced during combustion will condense, causing engine
parts and the exhaust system to rust.
Summary of Contents for MC 85 2023
