GAS GAS 2009 EC 200 2T, Owner'S Manual

Page: 44 / 107

Owner’s manual
-44-
Multifunction gauge (Only on certain models and markets)
The multifunction device is water resistant, has 3 buttons, 2 LEDs. And a brigthly
lit LCD.
1
3
2
5
4
6
7
Quick guide
1. Amber warning led
2. Red warning led
3. LCD screen
4. Left button
5. Middle button or MODE
6. Right button
7. Remote Switch
It provides information about the speed, average speed, maximum speed, co-
vered distance, total covered distance, operation time, total operation time, en-
vironmental temperature, engine temperature, battery voltage, time, and main-
tenance.
NOTE: engine temperature and voltage sensor is optional and is not available
in GAS GAS .
WARNING
The multifunction device is water resistant but not waterproof.
Do not wash with pressure washer.
Do not leave the device in direct sunlight when the motorcycle is stopped.
Avoid contact with gasoline, degreasers or other cleaning chemical products
that could be cause damages in the device.
Always remember to pay attention to the road when you’re driving.
NORMAL MODE
Enable the screen backlight for 3 seconds, if the icon LO is displayed on the
screen or the temperature is below -5°C will not turn on
Switch between screens in normal mode
Start/Stop stopwatch
CONFIGURATION MODE
Enter to configuration mode
+ +
Switch between configuration parameters
Move through the current parameter
Move to the next digit of the current parameter