Garudan GPS/X-3525 Series, User Manual

Page: 6 / 79

© ANITA
MP03200 EN_180810 6
3. SAFETY INSTRUCTIONS
Based on the TUV SUD Conformity Compliance and compliance with all standards, each
machine is CE marked - Declaration of Conformity.
General Safety Instructions
- Read this manual, operating instructions and operating instructions thoroughly before using
the machine. There are also listed machine parameters and specified limit values and
conditions under which the machine may be used
-
Make sure the Stop button position is operational
-
Under no circumstances place your fingers in the area of the sewing needle
-
Ensure that the electrical cables are not damaged to prevent injury to the exposed wire.
Repaint the damaged covers immediately or replace them with a flawless cover.
-
When replacing a needle, threading, repairing or any mechanical adjustment and leaving the
machine, turn off the drive with the on / off switch or the main machine switch.
-
Before dismantling the machine or maintenance, disconnect the power supply by pulling the
plug out of the socket .
-
If you are not working on the machine, turn off the power supply with the main switch.
-
Do not modify the machine in any way that could compromise safety.
-
If the label is damaged, order a new one at our company and place it in the original location.
-
If there is a power failure, turn off the machine with the main switch.
-
Be careful not to interfere with moving machinery mechanisms, especially sleeves, loose
clothing and hair.
-
Do not operate the machine under the influence of alcohol or drugs.
Safety instructions hen delivered
- When unpacking, follow the markings on the packaging.
- Immediately notify the carrier of visible damage to the shipment. Check the contents of the
shipment with the order and notify the manufacturers immediately of any defects. Later
complaints will not be recognized.
www.garudan.cz