en
Maintenance and care
38
Robotic lawn mower
Check the rollers can move freely
1 Once a week, thoroughly clean the areas
around the rollers (13-1) with a hand brush or
cloth.
2 Check the rollers (13-1) can move and steer
freely.
➯
If the rollers (13-1) do not move freely,
they must be freed up or renewed.
Checking the base station
1 Disconnect the transformer mains plug.
2 Check the contacts (11-1) on the base station
for contamination and clean using a cloth if
necessary.
3 Push the contacts towards the base station
and release.
➯
The contacts must spring back into the
initial position.
ADVICE
If the contacts do not spring back into the
initial position, have them checked by a
dealer, technician or service partner, and
renewed if necessary.
Storage
Before storage (winter) of the robotic lawn mower
following points should be noted:
Fully recharge the battery.
Off robotic lawn mower.
Clean robotic lawn mower.
Replace damaged cutting blade.
Robotic lawn mower store in a dry, frost-free
room.
REPAIRS
Repair work is only allowed to be carried out by
expert workshops or our service centres.
Repair work is only permitted using original spare
parts.
Renewing the cutting blades
1 Switch off the automatic lawnmower (3-7).
2 Put down the automatic lawnmower with the
cutting blades pointing upwards.
3 Unscrew the screws with a 5.5 mm spanner.
4 Pull the cutting blades (13-6) out of the blade
seat.
5 Clean the blade seat with a soft brush.
6 Insert new blades and screw tight with the
screws.
➯
As a rule, the clearer blades do not need
to be renewed.
In case of stubborn dirt that cannot be removed
with a brush, the blade plate (13-3) must be rene-
wed because an imbalance can lead to increased
wear and malfunctions.
ADVICE
Damage due to an incorrect repair!
If cutting blades are damaged and bent,
they are not allowed to be straightened.
