en
Assembly
30
Robotic lawn mower
Checking the connection
Once the cables have been connected, the LEDs
(7-1) and (7-2) must light up. If this is not the
case, pull out the mains plug and check if all plug
connections and cables are correctly seated; also
check them for damage.
Yellow LED (7-1)
lights up if the base station is connected to the
transformer and there is an electrical power
supply to the transformer.
flashes when the robotic lawn mower is char-
ging.
Green LED (7-2)
lights up when the boundary cable is laid cor-
rectly and the loop is OK.
flashes and then goes out if the loop of the
boundary cable is not OK.
ADVICE
The Li-ion battery contained is subject
to the requirements of hazardous sub-
stances regulations. The battery can be
transported on the road by private users
without being subject to additional requi-
rements. Only transport the battery if it
is undamaged. The battery must be pro-
tected against contact by other objects,
short circuit and inadvertent sliding. If
transported by third parties (e.g. haulage
company or transport by air) then it is ne-
cessary to comply with special require-
ments on the packaging and labelling.
