background image

Magnum 6KL Managed Edge Switch Installation and User Guide 

11/09

 

 
 

30

www  GarrettCom  com

.

.

4.4 

Power Budget Calculations for 6KL Modules with Fiber Media 

 
 

Receiver Sensitivity and Transmitter Power are the parameters necessary to 

compute the power budget. To calculate the power budget of different fiber media 
installations using Magnum products, the following equations should be used:

 

OPB (Optical Power Budget) = P

T

(min) - P

R

(min) 

      

 where P

= Transmitter Output Power, and P

R

 = Receiver Sensitivity 

 
Worst case OPB = OPB - 1dB(for LED aging) - 1dB(for insertion loss) 
Worst case distance = {Worst case OPB, in dB} / [Cable Loss, in dB/Km] 
 

where the “Cable Loss” for 62.5/125 and 50/125

μ

m (M.m) is 2.8 dB/km,  

 

and the “Cable Loss” for 100/140 (Multi-mode) is 3.3 dB/km, 

 

and the “Cable Loss” for 9/125 (Single-mode) is 0.5 dB/km 

 

and the “Cable Loss” for 9/125 (Single-mode) is 0.4 dB/km (LX25) 

 

and the “Cable Loss” for 9/125 (Single-mode) is 0.25 dB/km (ZX40) 

 

and the “Cable Loss” for 9/125 (Single-mode) is 0.2 dB/km (ZX70) 

See 

http://www.garrettcom.com/techsupport/power_budget.pdf

 for more information on 

Power budget calculations 

 

5.0 

Magnum 6KL Managed Edge Switch Port Modules 

 

This chapter describes each Port Module (PM), including appearance, 
functionality, and status displays.

 

5.1 6KL 

Modules

 

 

An important feature of the Magnum 6KL is the use of Port Modules for 

flexible mixed-media connectivity to RJ-45 copper and various fiber media. The first 
four ports (1,2,3 & 4) of the Magnum 6KL Switches are fixed RJ-45 copper ports with 
dual-speed 10/100Mbps auto-negotiating capability. Additionally the switch can accept 
up to two Port Modules to provide the user with up to 6 additional ports (10 total) 
providing a wide selection of Ethernet copper and fiber media connections with 10, 100 
and 1000Mbps capability and up to 70km. 

 Note:   The 6KL Port modules are not identical to the port modules used in other 

6K products such as the 6K25e and 6K16V.   For information about other 

6K products, please see the applicable manual.  For a list of 6KL Port 

Modules, refer to Section 1.2 

Each 6KL Port Module (PM) is individually described in the following sections. 

Summary of Contents for magnum 6kl


























































Reviews: