Magnum 6KL Managed Edge Switch Installation and User Guide
11/09
35
www GarrettCom com
.
.
The Multimode LC ports support fiber optic cable distances up to the IEEE
standard 100Mbps distance limits, typically 2km at full-duplex.
The 6KL4-2MLC2RJ copper ports support Ethernet twisted pair segments of
any standard length. It is equipped with a two-port RJ-45 connector, and offers 10/100
full / half-duplex auto-negotiating capability on each port. The RJ-45 connector is
shielded to minimize emissions and will allow both unshielded twisted pair (UTP) and
shielded twisted pair (STP) cable connections. When installed in a Magnum 6KL Series
Managed Switch, the copper ports support the standard distance of 100m on each port.
(see Sections 5.1.2 and 5.1.3 for more details)
5.1.6
6KL4-2SLC2RJ, 6KL4-2SLCL2RJ (Slot C)
2 x Singlemode LC / 2 x RJ45
The 6KL4-2SLC2RJ 4-port Fiber module provides two 100Mb Singlemode
LC Fiber ports, supporting distances up to 20km and two 10/100Mb switched RJ45 ports.
This module provides the same functions as the Multimode version (see Section 5.1.2
and 5.1.3 for more details).
The 6KL4-2SLCL2RJ 4-port Fiber module provides two 100Mb Singlemode
LC Fiber ports, supporting distances up to 40km and two 10/100Mb switched RJ45 ports.
This module provides the same functions as the Multimode version (see Section 5.1.2
and 5.1.3 for more details).
5.1.7
6KL4-4MTRJ, 4 x Multimode MTRJ (Slot C)
The 6KL4-4MTRJ 4-port Fiber module provides four 100Mb Multimode
MTRJ Fiber ports.
The 6KL4-4MTRJ fiber port is a Small Form Factor (SFF) MTRJ Multimode
connector. The MTRJ’s small size and ease of connection make it a good choice for
100Mbps “fiber-to-the-desktop” Ethernet connectivity. When installed in a Magnum
6KL Series Switch, it supports fiber optic cable distances up to the IEEE-standard
100Mbps distance limits, i.e., typically 2km at full-duplex and 412m at half-duplex.
The cable end is a “plug-in” connector with both fiber strands terminated in
one housing that cannot be improperly inserted. Each port has a Link/Activity (L/A)
LED indicating proper connectivity (Link) with the remote device when lit and blinking
(Activity), indicating packets being received.
