background image

Magnum 6KL Managed Edge Switch Installation and User Guide 

11/09

 

 
 

13

www  GarrettCom  com

.

.

 

„

  S-Ring and Link Loss Learn for economical high availability using ring topology   

  

 

S-Ring combined with the Link-Loss-Learn feature provides reliable fast recovery of a 
fault in an economical ring topology combining unmanaged and managed switches.

 

„

  RSTP-2004 for rings and meshes, fastest fault recovery, interoperability

 

 

RSTP-2004 provides reliable fast recovery from a fault in a redundant LAN, which 
may include Magnum switches and routers as well as other vendors industry-standard-
RSTP products. Redundant topologies may include rings, dual-rings, and complex 
meshes.

 

 

2.5 Applications

 

 

Magnum 6KL Edge Switches offer high performance, modularity and 

availability.  They provide the flexibility of 100Mbps fiber and copper ports as well as 
single or dual Gigabit (1000Mb) ports, with industry-standard LAN management 
software. Magnum 6KL Switches are easily used in a variety of applications including 
client/server computing, secure VLAN- performance upgrades to departmental networks, 
and stream traffic for VOIP and audio/video applications.  They can also be used in a 
much diversified combination of mixed media in Industrial floor applications. The 
performance characteristics of the 6KL Switches enable them to inter-connect a series of 
subnets (one subnet per 6KL Switch port) in a LAN traffic center. The subnet 
connections may be via fiber or twisted pair cabling, 100Mbps or 10 Mbps speed, and 
full-or half-duplex.   
 

The mixed-media modular capability is ideal for industrial applications where 

existing Ethernet LAN network cabling must be accommodated.  The fiber-built-in 
media capability is ideal for integrating future-proof fiber cabling into the LAN structure. 

Summary of Contents for magnum 6kl


























































Reviews: