CS 5000
User Manual
©2009 GARRETT METAL DETECTORS 7
PN 1530100 REV H
2.
CONTROLS & MODULES
2.1
DISPLAY PANEL
2.1.1
LED BAR GRAPH
This LED display at the top of the Control Panel indicates the detection intensity which is based on
the amount and composition of metallic objects passing through the unit.
2.1.2
READY LIGHT
This green light appears when power is turned on and the unit is ready to operate. The light will also
indicate when an individual inspection has been completed by the unit and it is ready to accept the
next person. Operators should make certain the green light is visible before any individual is permitted
to pass through the detector.
2.1.3
LCD PANEL
Large alpha/numeric LCD below the Bar Graph reports all operating, setup and diagnostic information
of the unit. Because the unit is designed to be “user-friendly,” all regulation and control functions are
self-prompting with necessary commands shown on the LCD display.
2.1.4
ALARM LIGHT
This red light appears when the unit detects a targeted amount of metal on an individual, according
to specifications of the Program and Sensitivity levels that have been selected. Operators should be
instructed to respond to all alarms. For any detector to be effective in a security system it is absolutely
necessary that the cause of EVERY ALARM be determined.
Summary of Contents for MAGNASCANNER CS 5000
Page 2: ......
Page 26: ...CS 5000 User Manual 2009 GARRETT METAL DETECTORS 26 PN 1530100 REV H 17 18 20 10 19 21 11 4...
Page 44: ......
