CS 5000
User Manual
© 2009 GARRETT METAL DETECTORS 36
PN 1530100 REV H
11.2
PROGRAMS
Note: Although different settings are required for different applications, the manufacturer
finds Program D most effective for high volume high security; Program A for low volume
maximum security; and Program 9 in loss prevention situations and in cases where noise
problems limit performance of custom programs. It is the responsibility of the user to select
and implement that program which is best suited to a particular situation.
11.2.1
PROGRAMS 1-10
• Standard programs designed to detect a broad range of objects.
• Lower numbered programs are primarily for the detection of ferrous objects such as iron, most
stainless steel, etc.
• High numbered programs are primarily for the detection of conductive objects such as those made
of aluminum, zinc, lead, etc.
• Programs 7-9 provide a balanced response to ferrous and conductive objects.
• Program 9 provides good discrimination against foils (cigarette packs, etc.).
• Immunity to external noise is good, making these programs useful in noisy environments.
• Overall discrimination is poor.
• Recommended applications include loss prevention and installations where specific objects need
to be emphasized or ignored.
11.2.2
PROGRAMS 11-15
• Standard programs designed to detect a broad range of objects.
• Lower numbered programs are primarily for the detection of ferrous objects such as iron, most
stainless steel, etc.
• Higher numbered programs are primarily for the detection of large conductive objects such as
those made of aluminum, zinc, lead, etc.
• Programs 14 and 15 provide a balanced response to ferrous and conductive objects.
• Immunity to external noise is poor, making these programs difficult to use in noisy environments.
• Overall discrimination is moderate.
• Recommended applications include loss prevention and installations where specific objects need
to be emphasized or ignored.
11.2.3
PROGRAM A
• Custom program designed to detect the broadest range of objects.
• Emphasis of detection is on conductive objects. This program provides the highest level of security
available in the CS 5000.
• Immunity to external noise is moderate, making this program usable in most environments.
• Discrimination is poor.
• Recommended applications include
prisons
and other installations where volume requirements
allow thorough inspection of each individual.
11.2.4
PROGRAM B
• Custom program designed to detect ferrous and conductive objects equally.
• Immunity to external noise is moderate, making this program usable in most environments.
• Discrimination is moderate.
• Recommended applications include general security.
Summary of Contents for MAGNASCANNER CS 5000
Page 2: ......
Page 26: ...CS 5000 User Manual 2009 GARRETT METAL DETECTORS 26 PN 1530100 REV H 17 18 20 10 19 21 11 4...
Page 44: ......
