CS 5000
User Manual
© 2009 GARRETT METAL DETECTORS 34
PN 1530100 REV H
10.18
COUNTER
If the current traffic count is not being reported on the LCD display, press this touchpad to view it.
Pressing and holding this touchpad for ten (10) seconds enables the operator to return the traffic
counter to zero (0). Supervisors will issue instructions concerning this control and its use by individual
operators.
10.19
SUMMARY
It is important that all operators study the guidelines in this section carefully and remember their basic
responsibilities for operating the CS 5000 as stated on the first page:
• Make sure power is turned on;
• Make certain the unit is operating properly;
• Adjust volume of the alarm;
• Read the counter;
• Respond to all alarms.
Most important of all is the operator’s responsibility to make certain that every alarm be investigated
and that the reason for that alarm be determined.
The CS 5000 is a fine walk-through metal detector. But, in the end, even an electronic device as
sophisticated as this is only a tool. Ultimate success of its operation is dependent upon:
• The training and diligence of the men and women who operate it;
• The system of which it is a part.
Summary of Contents for MAGNASCANNER CS 5000
Page 2: ......
Page 26: ...CS 5000 User Manual 2009 GARRETT METAL DETECTORS 26 PN 1530100 REV H 17 18 20 10 19 21 11 4...
Page 44: ......
