Garrett GTI 1500 Owner'S Manual Download

Page: 73 / 88

• You have checked with your dealer.

• You have tried to restore factory set-

tings.

• You have carefully packed the detec-

tor in its original shipping carton or other

suitable box. Make certain that proper

insulation or packing material is used to

keep all parts secure. Do not ship stems,

headphones or armrests unless they are

part of the problem. Return any coil that

you believe may be causing a problem.

• Ship to Garrett Metal Detectors, 1881

West State Street, Garland, TX 7502.

Foreign shipments must be authorized by

a local agent or representative.

• You can call Garrett's Customer Service

Department (972) 9-6151, if you have

further questions.

Please allow approximately one week for

Garrett technicians to examine and ser-

vice your detector after receiving it, plus

another week for return shipping. All

equipment will be returned UPS or parcel

Graphic Target Imaging 1500 - 7

Summary of Contents for GTI 1500
























































































Search results

Summary of Contents for GTI 1500

Reviews:

Related manuals for GTI 1500

Brands by name

Popular brands

Garrett GTI 1500, Owner'S Manual

Search results

Summary of Contents for GTI 1500

Reviews:

Related manuals for GTI 1500

Brands by name

Popular brands