Garrett GTI 1500 Owner'S Manual Download Page 62

Page: 62 / 88

Checking Condition

Battery condition is reported continuously

by the horizontal row of squares on the

lower right side of the screen. Five are vis-

ible when fully charged batteries are being

used. When only one square remains,

batteries should be changed. You should

always carry spares so that you will be

ready.

Rechargeable Batteries

When rechargeable batteries are being

used, the RECHARGE battery option must

be turned on for the battery level indi-

cator to be accurate. Continue pressing

the menu button to scroll to the battery

RECHARGE icon. Press (+) to set the

detector for rechargeable batteries. Press

(-) to set the detector for carbon or alka-

line batteries.

Replacement

1. Turn OFF the GTI 1500 by pressing the

POWER touch pad.

2. It is not necessary to remove the bat-

tery case. Just slide it back slightly from

its normal position beneath the armrest.

62 - Garrett Metal Detectors

Summary of Contents for GTI 1500
























































































Search results

Summary of Contents for GTI 1500

Reviews:

Garrett GTI 1500, Owner'S Manual, Page: 62 / 88

Search results

Summary of Contents for GTI 1500

Reviews: