Garrett GTI 1500 Owner'S Manual Download

Page: 19 / 88

Size C

- Oval extending to C grid lines

(purple): targets larger than coins and

smaller than 12-oz. cans, such as large

rings, small belt buckles, jewelry and such

trash targets as screw tops, bottle caps

and complete pull tabs.

Size D

- Oval extending to D grid lines

(blue): larger belt buckles, large jew-

elry items, 12-oz. cans and other items of

similar size.

Size E

- Oval extending to E grid lines

(green): objects larger than a 12-oz. can,

such as kettles, strongbox or big metallic

trash.

Experience with Treasure Imaging will

enable a hobbyist to identify to an amaz-

ingly precise degree any target before it

is recovered. The Target ID Guide print-

ed above the LCD screen showing coin

denominations, gold, silver and other typi-

cal metallic objects is designed to relate

location of the Target Cursor with the size

indication to help identify discoveries.

Note - The five letters (A,B,C,D,E) on each

Graphic Target Imaging 1500 - 19

Summary of Contents for GTI 1500
























































































Search results

Summary of Contents for GTI 1500

Reviews:

Related manuals for GTI 1500

Brands by name

Popular brands

Garrett GTI 1500, Owner'S Manual

Search results

Summary of Contents for GTI 1500

Reviews:

Related manuals for GTI 1500

Brands by name

Popular brands