Garrett GTI 1500 Owner'S Manual Download Page 7

Page: 7 / 88

• Use the Target ID Guide to learn what

you've found.

• Pinpoint electronically to determine loca-

tion of target and learn size and depth.

• Find deeper treasures with computerized

circuitry.

Your GTI 1500, whose microprocessor-

controlled circuitry has been acclaimed

and proven through countless hours of

field use, is unparalleled in the simplicity

of its operation. Just touch the POWER

touch pad and begin hunting immediately.

The GTI 1500 offers dedicated coin hunt-

ers the automatic tuning adjustment pre-

cision available only with computerized

controls.

When you find a target, Garrett's revolu-

tionary GTA display instantly directs you to

that target's range on the Target ID Guide.

Press the TREASURE IMAGING pad to dis-

cover its exact size and depth, which will

give you additional clues to its identity.

Graphic Target Imaging 1500 - 7

Summary of Contents for GTI 1500
























































































Search results

Summary of Contents for GTI 1500

Reviews:

Garrett GTI 1500, Owner'S Manual, Page: 7 / 88

Search results

Summary of Contents for GTI 1500

Reviews: