RFID settings in the web interface
After activate the RFID check, you can add and remove RFID tags
manually or read in RFID tags via the RFID reader (Read tag from
wallbox).
Note: when multiple GTB Twinboxes are connected in a grid, you
can activate RFID tags individually for each Twinbox.
You can also add a name or comment for each tag.
Read tag from wallbox: Hold the tag against the RFID reader and
the tags ID is shown in the interface. Press save
.
When RFID check is activated, you need to hold an active RFID
tag against the RFID reader to activate the charging process. A
ticking sound will indicate that the GTB is waiting for the RFID tag.
The ticking continues in 30sek. After that, you need to reconnect
the charging cable to the vehicle again and restart the process.
If the RFID tag is accepted, the charging process will begin. Red
light from GTB indicates that the tag is not accepted.
To erase a RFID tag, click the “-“ at the side of the registered tag.
Schedule
Settings menu for scheduled activation of GTB Twinbox.
USER MANUAL
29
EN
