GARO Nova GTC, Assembly Instructions / End User Instruction

Page: 3 / 26

INFORMATION
Warnings
Latest manual can always be found at
http://garoemobility.com/support
GARO GTC assortment is a range of portable EVSE stations for
Mode-3 AC charging.
Below are some example of standard features:
• Double outlets for Mode-3 EV charging.
• Up to 2x7,4kW simultaneous charging from one EVSE
depending on model.
• MCB and RCCB with DC-fault monitoring for each outlet.
• Internal static DLM (Dynamic Load Management).
• Suitable for installation on ground or wall.
• LED status indication.
Some models also have:
• Energy meters for each side
• Communication module for Wifi/LAN functions
• RFID readers
General functions:
• Install and administrate RFID readers
• Connect mobile/tablet/PC to webinterface
• Remote charging activation from a relay/timer etc.
• Update firmware via webinterface
Some functions require specific installed hardware ie
communication module.
For full user manual: www.garoemobility.com/support
Dielectric Voltage Withstand Test is not allowed on GTC
Nova
This equipment should not be used by anyone (including
children) with reduced physical, sensory or mental
capacity, or anyone lacking in experience or knowledge,
unless they are provided with supervision or prior
instruction in how to use the equipment by the person
responsible for their safety.
The GTC Nova range of charging stations is designed
exclusively for charging electric vehicles.
The GTC Nova must be grounded according to local
country installation requirements.
Do not install or use the GTC Nova near flammable,
explosive, harsh, or combustible materials, chemicals, or
vapors.
Turn off the electrical power at the circuit breaker before
installing, configuring or cleaning of the GTC Nova.
Use the GTC Nova only within the specified parameters.
Never spray water or any other liquid directly at the GTC
Nova. Never spray any liquid onto the charge handle or
submerge the charge handle in liquid.
Do not use this equipment if it appears to be damaged or
if the charging cable appears to be damaged.
Do not modify the equipment installation or any part of the
product.
Do not touch the terminals with fingers or any other
objects.
Do not insert foreign objects into any part of the GTB
Nova.
About this manual
This document contains general descriptions which are verified to
be accurate at the time of printing. However, because continuous
improvement is a goal at GARO, we reserve the right to make
product and software modifications at any time. This range
is subject to continual product development. Errors, typo and
omissions excepted.
3
EN
INFORMATION