GARO Nova GTC, Assembly Instructions / End User Instruction

Page: 22 / 26

Connect GTC Nova to a local network via ethernet
using static IP-adress
The GTC Nova will attempt to connect to the local network using
a static IP-address.
1. Choose “Ethernet” and “Static IP”
2. Enter the IP address, Netmask and Gateway information
3. Press Save
Launch the browser on your device and go to url: chargebox.
garo.se and follow the instructions.
Note: your device needs to be connected to same network as the
GTC Nova
Updating the firmware
When GTC Nova is connected to internet via a local network
(wifi or ethernet), klick on “Check for updates” and follow the
instructions.
When multiple GTC Nova is connected in a grid, update for all
units can perform at same time from the GTC Master.
USER MANUAL
(picture 14)
By pressing the SW3 on CC2 for >3s, you will reset the network
settings to default AP (access point) mode. See picture 24. See
SSID and password information inside the front door.
Factory reset of Network settings
22
EN