Universal dimmer actuators GDA2K-400 KNX / GDA4K-400 KNX
pdated: Mai-17 (Subject to changes) Page 18 of 63
•
Object 240 "Central permanent ON"
Central switch-on function.
Enables simultaneous switching on of all channels with one single telegram.
0 = No function
1 = Permanent ON
Participation in this object can be set individually for each channel
(see parameter page Channel C1/C2: Configuration options
)
.
IMPORTANT:
This object takes top priority.
As long as it is set, the other switch commands will not work on the participating channels.
•
Object 241 "Central permanent OFF"
Central switch-off function.
Enables simultaneous switching off of all channels with one single telegram.
0 = No function
1 = Permanent OFF
Participation in this object can be set individually for each channel.
IMPORTANT:
This object has the second highest priority after
Central permanent ON
. As long as it
is set, the other switch commands will not work on the participating channels.
•
Object 242 "Central switching"
Central switch function.
Enables simultaneous switching on or off of all channels with one single telegram.
0 = OFF
1 = ON
Participation in this object can be set individually for each channel
(see parameter page Channel C1/C2: Configuration options
)
.
With this object, every participating channel responds exactly as if its 1st object (i.e. obj. 0, 30, etc.)
were receiving a switching command.
•
Object 243 "Call up/save central scenes"
This object can be used to save and subsequently call up "scenes".
The save process stores the current status of the dimming channel (or the switch state with other
actuators), regardless of how the status was brought about (e.g. via dimming values, switching
commands, central objects or the manual switches).
The saved status is thus restored when called up.
Each channel can participate in a maximum of 8 scenes.
See appendix: The scenes
