Entering Custom Avoids
Custom Avoids allows you to enter specific areas and roads that you
would like to avoid every time you navigate. Custom Avoids can be
added while you are navigating a route or before you navigate.
To enter a custom avoid:
1. Press the
NAV
key while navigating to a destination in
Automotive mode.
2. Select
Custom Avoids
. Press
ENTER
.
3. Press
ENTER
when the
Add Avoid
button is highlighted.
4. Select
Avoid Road
or
Avoid Area
and press
ENTER
.
5. Use the
Rocker
key to move the arrow to the first point in the
avoidance area. Press
ENTER
to select the first point.
6. Move the arrow to the end point and press
ENTER
. During
route calculation and navigation, the 276C Plus will always
avoid the area within the box or the selected area of the road.
7. When finished, highlight the
OK
button and press
ENTER
.
Creating a Detour
If, while navigating a route, you encounter is road construction or
some other form of a detour, you can have your 276C Plus create a
detour route for you. The detour you create is only temporary and
applies only to your current route.
To create a detour:
1. While navigating a course, press the
NAV
key.
2. Select
Detour
from the Navigate Menu.
3. Select the desired distance and press
ENTER
. The 276C
Plus recalculates your course based upon your detour
distance.
4. To end the detour manually, press
NAV
again and select
Cancel Detour
.
64
276C Plus Owner’s Manual
B
ASIC
O
PERATION
IN
THE
L
AND
M
ODES
>
N
AVIGATING
IN
A
UTOMOTIVE
M
ODE
190-00501-00_0A.indd 64
1/13/2005 10:43:48 AM
