manualshive.com logo in svg

Garmin West Marine 276C Plus, Owner'S Manual

Share
Download
Garmin West Marine 276C Plus Owner'S Manual Download Page 3

I

NTRODUCTION

Thank you for choosing the 276C Plus, which utilizes the proven 

performance of Garmin

®

 GPS and full-featured mapping to create an 

unsurpassed portable marine navigation chartplotter and automobile 

navigation device. Take a moment to compare the contents of this 

package with the packing list on the outside of the box; if any pieces 

are missing, contact your Garmin dealer immediately.

About This Manual

To get the most out of your new navigation system, take time to read 

this manual and learn the operating procedures for your unit. This 

manual is organized into the following eleven sections: 
The 

Introduction

 contains the Table of Contents. The 

Getting 

Started

 section provides an overview of the unit, how to turn the 

unit on, and how to simulate navigation. 
The

 Basic Operation in the Sea Modes 

section provides you with 

information about navigating with the 276C Plus in the sea modes: 

Powerboat and Sailboat. The 

Pages and Features of the Sea Modes

 

section reviews the main pages and features in sea modes, such as 

using DSC and Man OverBoard. 

The

 Basic Operation in the Land Modes 

section provides you with 

information about navigating with the 276C Plus in Automotive 

mode and Off Road mode. The 

Pages and Features of the Land 

Modes

 section reviews, in detail, the main pages and features in 

Automotive mode and Off Road mode, such as the Trip Computer. 
The 

Additional Page and Features

 section describes pages and 

features found in the Main Menu. 
To learn how to change the settings of the 276C Plus, read the 

Customizing Your 276C Plus

 section.

If you have a Garmin GSD 20 Sounder Module connected to your 

276C Plus, refer to the 

Setting Up and Using Sonar 

section. 

The 

Appendix

 contains specifications, optional accessories, 

maintenance information, and other product information. 

Read the 

Safety Information for information about installing and using 

your 276C Plus safely and responsibly. 

An 

Index

 is provided at the end of the manual for reference.

276C Plus Owner’s Manual 

i

I

NTRODUCTION

 > 

A

BOUT

 T

HIS

 M

ANUAL

190-00501-00_0A.indd   1

1/13/2005   10:43:18 AM

Summary of Contents for West Marine 276C Plus













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands