Creating a Waypoint Using the Map
You can quickly create a waypoint using the Map page. When you
pan the map and move the arrow over a map item, you will see a
highlighted description of that item. The 276C Plus uses the map
item text shown on the map as the default name and symbol for the
new waypoint.
To create a new waypoint using the Map page:
1. Press
PAGE
or
QUIT
until the Map page is displayed.
2. Use the
Rocker
key to move the arrow to the desired map
position or map feature.
3. Press and quickly release
ENTER/MARK
to capture the
arrow position. Pressing and holding
ENTER/MARK
marks
your present position, not the arrow’s location.
4. If you have highlighted a map feature, an information page
appears after you press
ENTER
. Use the
Rocker
key to
highlight
Save
and press
ENTER
to save the item as a
waypoint.
Map Feature Information Page
Select
Save
to save feature as a waypoint.
5. The New Map Waypoint page appears. To accept the
waypoint with the default information, highlight
OK
and press
ENTER
.
6. To change any information on the New Map Waypoint page,
highlight the appropriate field and press
ENTER
. After
entering your changes, highlight
OK
and press
ENTER
.
22
276C Plus Owner’s Manual
B
ASIC
O
PERATION
>
C
REATING
AND
U
SING
W
AYPOINTS
190-00501-00_0A.indd 22
1/13/2005 10:43:30 AM
