manualshive.com logo in svg

Garmin West Marine 276C Plus, Owner'S Manual

Share
Download
Garmin West Marine 276C Plus Owner'S Manual Download Page 54

Compass Page

During active navigation in Powerboat or Sailboat mode, the 

Compass page guides you to your destination with a graphic 

compass display and a bearing pointer. Press 

PAGE

 or 

QUIT 

repeatedly to display the Compass page. 

Compass Page

Rotating 

Compass Ring

Bug Indicator

Compass Arrow

Data Fields

The middle of the page features a rotating “compass ring” that 

shows your course over ground (track) while you are moving. Your 

present course over ground is indicated at the top of the compass 

ring. The direction of the destination (bearing) relative to the course 

over ground is indicated by an arrow in the middle of the compass 

ring and a bearing “bug” on the outside of the compass ring. 

If the arrow points up, you are going directly to the waypoint. If the 

arrow points any direction other than up, turn toward the arrow until 

it points up, then continue in that direction. 

 

NOTE: 

You must be moving for the compass to accurately 

update and display your heading. 

Compass Page Options

The options menu on the Compass page allows you to customize the 

Compass page to your preferences. Like the Map page, the Compass 

page features user-selectable data fields. For definitions of data field 

options, refer to page 120. When the Compass page is open, press 

MENU

 to open the options menu.

Show Course Pointer

—displays the Course Pointer that shows how 

to get back on course. 

Show Bug Indicator

—displays the bearing bug indicator (the 

purple tick mark on the compass ring).

46 

276C Plus Owner’s Manual

S

EA

 M

ODES

 P

AGES

 

AND

 F

EATURES

 > 

C

OMPASS

 P

AGE

190-00501-00_0A.indd   46

1/13/2005   10:43:41 AM

Summary of Contents for West Marine 276C Plus













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands