Garmin VIRB Ultra 30, Quick Start Manual

Page: 5 / 311

4 VIRB® ULTRA 30
EN
Charging the Battery
The status LEDs flash rapidly when the battery charge
level is low. You can charge the battery using a standard
wall outlet or a USB port on your computer. The camera
is powered by a removable lithium-ion battery.
You can also charge the battery using a battery charger
accessory. Go to
Garmin.com/VIRB to purchase accesso-
ries.
NOTE: The device will not charge when outside the
approved temperature range (Specifications, page43) .
1 Turn off the camera.
Most power sources do not provide enough power to
charge the camera while it is on.
2 Plug the small end of the USB cable into the USB port
1
on the device.
3 Plug the large end of the USB cable into an AC adapt-
er or a computer USB port.
When you connect the device to a power source, the
top LED
2 turns solid red.
NOTE: The battery may charge slowly when using a
computer USB port. Some portable computers may
not provide enough power to charge the battery.
2
1
4 Charge the device completely.
When the camera is fully charged, the top LED turns
off.
Installing the Desiccant Pack
WARNING
Do not eat desiccant packs. Desiccant packs contain sili-
ca, which may cause irritation in your digestive system.
VIRB ULTRA APAC-八國 [142x86mm]-15.indd 4 2016/8/9 上午 10:42:00