Garmin VIRB Ultra 30, Quick Start Manual

Page: 30 / 311

VIRB® ULTRA 30 29
EN
A list of nearby compatible devices appears.
TIP : If your device does not appear, you should move
closer to the device and verify the wireless display
option is enabled on the device.
3 Select your device.
4 If necessary, enter the PIN.
The video plays on your display. You can control video
playback using the controls on the camera screen.
External Displays
You can display the contents of the camera screen on an
external display. This allows you to view videos and pho-
tos on the external display or use the external display as
a viewfinder.
Outputting HDMI
®
Video
To output HDMI video, you must have a micro HDMI to
HDMI cable.
1 Connect the micro HDMI end of the cable to the
port on the camera.
2 Connect the large end of the cable to an available
port on your external display.
Outputting Composite Video
Before you can output composite video, you must
purchase the VIRB A/V rugged combo cable accessory.
Go to
http://virb.garmin.com/products/rugged-combo-ca-
ble-virbx-xe .
You must also have an RCA composite video cable.
1 Connect the accessory cable to the mini-USB port on
the camera.
2 Connect an RCA composite video cable to the VID
OUT connector of the accessory cable and to an
available port on your external display.
G-Metrix
Using the built-in GPS receiver and sensors, your camera
can detect G-force, altitude, speed, orientation, and
many other performance metrics. This data is saved
automatically as G-Metrix data. You can capture even
more G-Metrix data by wirelessly connecting external
ANT+ sensors, other Garmin devices, and compatible
VIRB ULTRA APAC-八國 [142x86mm]-15.indd 29 2016/8/9 上午 10:42:02