Garmin VIRB Ultra 30, Quick Start Manual

Page: 25 / 311

24 VIRB® ULTRA 30
EN
this time-lapse session 4 .
5 Select the camera key to stop taking photos.
Taking Extended Time-Lapse Photos
1 From the main menu, select Photos > Mode > Time-
lapse .
2 Select Type > Extended
3 Select Start Time , and select the time when camera
should start taking time-lapse photos.
If you select Now, the camera starts taking pictures
immediately after you select the photo key.
4 Select Interval , and select a time interval between
photos.
5 Select Duration , and select the amount of time in
which the camera should continue taking photos.
If you select Continuous, the camera continues taking
photos until you select the camera key.
6 Aim the camera at the subject of the time-lapse photos.
7 From the viewfinder, select the photo key.
At the start time, the device takes a series of photos
at the selected interval. The camera stops taking
photos automatically after the select duration has
elapsed.
NOTE : The camera appears to be off while taking ex-
tended time-lapse photos. The screen, LED, and other
features are disabled to save power, but the camera
continues to take photos.
8 To manually stop taking photos, hold POWER to turn
on the camera, and select the photo key.
Taking Time-Lapse Photos at Night
When taking time-lapse photos at night, you should
attach the camera to a stable mount and allow time to
test your photo settings.
1 From the main menu, select Photos > Mode > Time-
lapse .
2 Select Type > Night
3 Select Interval , and select a time interval between
photos.
4 Select Exposure Time , and select an exposure time for
each photo.
You should select a longer exposure time for darker
VIRB ULTRA APAC-八國 [142x86mm]-15.indd 24 2016/8/9 上午 10:42:02