Garmin VIRB Ultra 30, Quick Start Manual

Page: 35 / 311

34 VIRB® ULTRA 30
EN
network, or a NMEA 2000
®
marine network.
1 From the main menu, select Wireless > Wi-Fi > Status
to turn on Wi-Fi wireless technology.
2 Select Mode > Connect .
3 Select Add New .
The camera searches for nearby Wi-Fi networks.
4 Select a Wi-Fi network.
5 If necessary, enter the network password. The camera
connects to the wireless network.
6 If necessary, connect your mobile device or Garmin
device to the same network to control the camera.
The camera remembers the network information and
connects automatically when you return to this location.
Managing Wi-Fi Networks
1 From the main menu, select Wireless > Wi-Fi > Status
to turn on Wi-Fi wireless technology.
2 Select Mode > Connect .
3 Select a saved network.
4 Select an option:
• To delete the network, select Forget .
The network information is deleted. To connect to
this network again, you must manually connect to
it and enter the network password.
• To change the password stored for the network,
select Change Password .
Creating a Wi-Fi Access Point
When you do not have access to an existing Wi-Fi
network, you can use your VIRB camera to create a Wi-Fi
access point. You can then connect your mobile device,
Garmin device, or other VIRB cameras to the access
point.
NOTE : Creating an access point allows you to control
one or more cameras using Wi-Fi technology, but it does
not provide other networking services or access to the
Internet.
1 From the main menu, select Wireless > Wi-Fi > Status
to turn on Wi-Fi wireless technology.
2 Select Mode > Create .
Your camera broadcasts a Wi-Fi network. The net-
work SSID name and password appear on the camera
screen.
VIRB ULTRA APAC-八國 [142x86mm]-15.indd 34 2016/8/9 上午 10:42:03