background image

Disabling a Zone

You can disable an unused zone and remove it from the audio 

level pages. When a zone is disabled, you cannot change any of 

the settings for that zone. You can disable zones 2, 3, and 4 

only.

1

Select 

 >   > 

 >   > 

ZONE

.

2

Select a zone.

3

Select 

ZONE ENABLED

 to clear the check box.

Disabling the Internal Amplifiers

If you do not connect speakers directly to zones 1 and 2, you 

can disable the internal amplifiers to reduce power consumption.

1

Select 

 >   > 

 >   > 

ZONE

.

2

Select 

INTERNAL AMP ON

 to clear the check box.

Network Configuration

TIP: 

You can select the network status icon from any screen to 

open the network configuration menu.

Setting the Fusion PartyBus Device as the DHCP Server

If you connected two Fusion PartyBus devices together directly, 

or connected more than two together using a network switch or 

wireless access point and did not install a router, you must 

configure only one Fusion PartyBus stereo to be the DHCP 

server.

1

Select 

 >   > 

 >   > 

NETWORK

 > 

ADVANCED

 > 

ETHERNET IP

 > 

STATIC IP

 > 

SAVE

.

2

Select 

 >   > 

 >   > 

NETWORK

 > 

ADVANCED

 > 

DHCP 

SERVER

 > 

DHCP ENABLED

 > 

SAVE

.

You can configure the IP address range of the DHCP server 

(

DHCP Settings

, page 21

).

Setting the Fusion PartyBus Device as a Wireless Access 

Point

Before you can connect additional Fusion PartyBus devices or 

smartphones to a Fusion PartyBus device wirelessly, you must 

configure at least one device as a wireless access point. This is 

not necessary if you installed a wireless router or other wireless 

access point on the network.

1

Select 

 >   > 

 >   > 

NETWORK

 > 

WI-FI ACCESS 

POINT

.

2

Select 

SSID

, and change the default SSID, or name, for the 

wireless access point (optional).

3

Select 

AP SECURITY

, and change the security type for the 

access point (optional).

NOTE: 

It is strongly recommended that you use the default 

WPA2 PERSONAL AP SECURITY setting. It is the most 

widely-used and secure wireless security protocol.

4

Select 

PASSWORD

, and change the default password for 

the access point (optional).

5

If necessary, select 

COUNTRY

, and select your region.

6

Select 

CHANNEL

, and select a channel range for the access 

point (optional).

7

Select 

SAVE

.

You can adjust the wireless access point configuration at any 

time (

Wireless Access Point Settings

, page 21

).

Connecting the Fusion PartyBus Device to a Wireless 

Access Point

1

Select 

 >   > 

 >   > 

NETWORK

 > 

WI-FI CLIENT

 > 

SSID

.

A list of wireless access points within rage appears.

2

Select the Fusion PartyBus wireless access point.

3

Select an option:
• To enter the password, select 

PASSWORD

, enter the 

password, and select 

.

• If you are connecting to the wireless access point using 

WPS, verify that WPS has been enabled on the access 

point, and select 

WPS

.

NOTE: 

It can take up to two minutes to successfully 

connect to the access point after you select 

WPS

.

4

Select 

SAVE

.

Advanced Network Configuration

You can perform advanced networking tasks on a Fusion 

PartyBus device, such as defining DHCP ranges and setting 

static IP addresses.

Wireless Access Point Settings

Select 

 >   > 

 >   > 

NETWORK

 > 

ADVANCED

 > 

WI-FI 

ACCESS POINT

.

NOTE: 

You must configure the device to be a wireless access 

point before you can change the settings (

Setting the Fusion 

PartyBus Device as a Wireless Access Point

, page 21

).

SSID

: Sets the SSID, or name, for the network.

AP SECURITY

: Sets the type of wireless security protocol used 

by the access point.

NOTE: 

It is strongly recommended that you set the AP 

SECURITY using WPA2 PERSONAL. It is the most widely-

used and secure wireless security protocol.

PASSWORD

: Sets the password for the access point. This is 

not available when the AP SECURITY setting is set to 

NONE.

COUNTRY

: Sets the region where the stereo is located. 

Different regions may use different channels on the wireless 

spectrum, so you should set this to best accommodate local 

wireless devices.

CHANNEL

: Sets the access point to use a group of channels in 

the high, low, or middle range of the available spectrum for 

your region. You may experience better performance if you 

set the channel in a range with fewer broadcasting access 

points.

DHCP SERVER

: Sets the device to act as a wireless access 

point and the DHCP server on the network (

DHCP Settings

page 21

).

WPS

: Initiates a Wi

Fi Protected Setup (WPS) connection. 

Devices with a WPS button or setting can connect to the 

access point on this stereo when the WPS connection is 

active.

NOTE: 

It can take up to two minutes to successfully connect 

to the access point after you select WPS.

DHCP Settings

Select 

 >   > 

 >   > 

NETWORK

 > 

ADVANCED

 > 

DHCP 

SERVER

.

DHCP ENABLED

: Sets the device as the DHCP server on the 

network.

START IP

: Sets the first IP address in the IP-address range of 

the DHCP server.

END IP

: Sets the final IP address in the IP-address range of the 

DHCP server.

Setting a Static IP Address

If the stereo is configured as a DHCP server, it is automatically 

assigned the IP address of 192.168.0.1. You can change this IP 

address.
If the stereo is a client on the network and you do not want the 

DHCP server to automatically assign an IP address to the 

stereo, you can set a static IP address.

NOTE: 

Every device on the network must have a unique IP 

address. If you select a static IP address that is the same as the 

IP address on the network, the devices will not work properly.

1

Select 

 >   > 

 >   > 

NETWORK

 > 

ADVANCED

 > 

WI-FI 

IP

 > 

STATIC IP

.

Music Playback

21

Summary of Contents for VIEO RV 850 Series







































Reviews: