manualshive.com logo in svg

Garmin MX20, Pilot'S Manual

Share
Download
Garmin MX20 Pilot'S Manual Download Page 94

Detailed Operation

Product Status

The Product Status page displays a list of all products supported by the MX20. The status is shown as available 
or not available. 

Available

 means the product is a part of your chosen subscription level and the MX20 has 

data that can be displayed. A time stamp will indicate the last received product time, which is the time the 
product was generated for transmission. 

Not Available

 means the product is not included in your chosen 

subscription level or that data has not been received since the last power cycle of the MX20. 

Diagnostics

The Diagnostics page shows error status codes generated by the XM radio receivers. One receiver is for weather 
data and the other receiver is for audio entertainment. Signal strength is shown as one of four levels. The GDL 
69/69A software version is shown in the lower left section of the display. 

. Whle n the Status page, press 

Menu/Enter

. 

. Press the 

Products

 menu tem key to toggle to the Dagnostcs dsplay. The Dagnostcs page 

nformaton s dsplayed. 

. Press the 

Start Diag

 menu tem key to actvate GDL /A dagnostcs. 

  Note: After diagnostics have been run, power to the GDL 69/69A must be recycled to return to 

proper operation, for GDL 69/69A software versions prior to version 2.13. 

Activation

The Activation page shows the radio identification numbers for one or both receivers. These numbers are 
needed to start a subscription. The Service Class is the name of the data subscription level. The Weather Prod-
ucts section shows the products contained in the selected subscription level. 

. Press the 

FN

 key and then the 

FIS

 functon key when dsplayed. 

. Press the fourth functon smart key on the rght to select the 

Status

 (Status) sub-functon. 

. Press 

Menu/Enter

 to dsplay the Products menu tem. 

. Press the 

Products

 menu tem smart key to toggle to the Dagnostcs dsplay. The Dagnostcs page 

nformaton s dsplayed, ncludng Rado IDs, Servce Class, and Weather Products. 

. Follow the XM Satellte Rado Actvaton procedure and press 

Accept

 at the approprate tme. 

GDL 69/69A - FIS

XM FIS Product Status

XM FIS Diagnostics

Summary of Contents for MX20

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands